Tidy up your wiring with the Direct-Connect Sensor Wire!
Say goodbye to the hassle of using a Castle sensor harness adapter. The Direct-Connect Sensor Wire eliminates an unnecessary connection point, resulting in a cleaner and more streamlined installation.
One end of the wire features the standard ROAR sensor plug, which easily connects to the back of any sensored motor. The other end plugs directly into any sensored capable waterproof Castle ESC.
Enjoy compatibility with the following ESCs:
• Mamba Micro X
• Mamba Micro X2
• Mamba X
• Mamba Monster X
• Mamba Monster X 8s
• Mamba XLX2
• Copperhead 10
Choose from available lengths:
• 200mm (7.9")
• 250mm (9.8")
• 300mm (11.8")
Motor Installation:
Plug new direct connect sensor wire into the back of the motor. The plug is keyed so it will only insert correctly one way.
Mamba Micro X Installation:
1. Unplug existing sensor harness (or dust cover) from ESC.
2. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
Mamba X Installation:
1. Remove 2 screws beside capacitors, using 1.5mm hex.
2. Remove wire harness retainer.
3. Unplug existing sensor harness from ESC.
4. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
5. Reinstall wire harness retainer and screws.
Simplify your installation and achieve a cleaner wiring setup with the Direct-Connect Sensor Wire. No more unnecessary connections or messy wiring. Experience the convenience and efficiency of Castle Creations' Direct-Connect Sensor Wire.
